Ankle socks in bamboo, when they make sense

Short answer: The ankle sock covers the ankle and stops just above the edge of the shoe. It is worn with sneakers and low shoes when you want to see little of the sock and not feel the shoe rubbing against your skin.

It sits where the shoe ends

The ankle sock is made to stop a couple of centimetres above the edge of the shoe. That means leather and seams do not rub against the heel and ankle, and there is no obvious sock line drawing the eye. See the most worn styles among our most popular Copenhagen Bamboo products.

Which shoes it suits

Sneakers, low lace-up shoes and loafers are the typical use. For boots and high shoes it is too short, because the shaft of the shoe reaches higher than the sock. There you need the classic length, which you will find among socks for men.

Ankle sock versus no-show sock

A no-show sock sits completely below the edge of the shoe and cannot be seen. The ankle sock shows a little, but it does not slip under the heel, because it wraps the whole heel. If you want both in the drawer, they are among socks for women.

Why it stays in place

A sock slips when the edge behind the heel is too low to hold on. The ankle sock has fabric over the heel and up around the ankle, so the back of the shoe cannot push it down. That is why many people switch from no-show socks to ankle styles.

When you walk a lot

On long days in town, the heel and ankle are the first places to feel the shoe. An ankle sock puts a layer of soft fabric between skin and shoe exactly there. That means less friction, and friction is what causes blisters after many steps.

Moisture in low shoes

Low shoes are often made of dense material that does not let moisture escape. Bamboo viscose absorbs moisture and moves it away from the skin. Your foot therefore feels drier through the day, even in sneakers that do not breathe very well.

Choosing the right size

Choose the size that matches your shoe size, and do not round up if you are close to the limit. An ankle sock that is too big folds under the foot and at the heel. The fold creates pressure, and that pressure is most noticeable in close fitting shoes.

Washing and care

Wash at 30 degrees with a small amount of detergent and skip fabric softener, which leaves a film on the fibres. The tumble dryer wears out the elastic, so hang the socks to dry. That way they keep both their fit and their softness for longer.

Colours for everyday wear

Black and dark ankle socks go with most shoes and show the least. White ones suit white sneakers and sport. Many people choose a handful of identical pairs in the same colour, so they never have to look for the second sock after washing.

When another length is better

In winter, in boots and on long walks in cold weather, a longer sock gives more warmth and protects against the shaft of the boot. The ankle sock is a summer and sneaker sock, and it does its best work in low shoes on mild days.

Frequently asked questions

Do ankle socks slip down?

Rarely. They cover the heel completely, and that is exactly where no-show socks slip, because the edge behind the heel is too low to hold.

Can they be used for sport?

Yes, for indoor sport and training in sneakers they work well, because they stay put and protect the ankle from the edge of the shoe.

Are they too short in winter?

In boots, yes. There the classic length is the better choice, because the shaft of the boot would otherwise rub against bare skin.