Bamboo underwear mens sizing and how to measure

Short answer: Bamboo underwear mens sizing on the label is only a starting point, because sizes vary between brands, so measure your waist and compare with the size guide. Here is how to measure, what the numbers on the label mean and what to do if you are between sizes.

Why bamboo underwear sizing needs a measurement

An S, an M or a number on the label does not mean the same thing at every brand. Cut, fabric and stretch all affect how a size fits, and two pairs in the same size can feel different. That is why a measurement of your own body is a better starting point than the size you usually take.

How to measure your waist

Use a soft tape and measure around your body where you normally wear the waistband. Hold the tape level and snug, but not tight, and breathe normally. Write the number down so you can use it again next time you shop. It helps to measure twice to be sure.

Reading the size guide

Compare your measurement with the guide for the cut you are looking at, since the same size can fit differently depending on the cut. See bamboo underwear for men and find the guide for the pair you are considering. Choose by the measurement and not by the size you usually take.

If you are between two sizes

Then think about how you want the pair to sit. The smaller size gives a closer, more supportive feel, and the larger gives more room. Neither is wrong. Notice how the pair feels after a few hours with bamboo underwear mens sizing in mind, and not only in the first minute.

Leg openings and waistband

Size is not only about the waist. Leg openings should sit without cutting in, and the waistband should lie flat. If the leg openings are too tight, it may be the cut and not the size that does not suit you. Try another cut before you go up a size.

The fabric and the stretch

Viscose from bamboo is soft and is usually blended with elastane for stretch. The stretch lets the pair adapt to you, but it does not replace the right size. A pair that is too small becomes tight, and one that is too large goes slack and shifts during the day.

Washing and size

Follow the care label and avoid high heat so the pair does not change shape. A laundry bag protects the elastic. If a pair seems different after washing, check that you followed the label before you decide the size is wrong. Match with socks for men, so the base layer feels alike.

Measure again over time

Bodies change, and so do pairs. Measure your waist once a year and compare with the guide. If your size has changed, replace pairs that no longer fit. For cooler days, see the long sleeve models.

Frequently asked questions

How do I measure my size in underwear?

Use a soft tape around your body where you normally wear the waistband, and hold it level. Compare the number with the size guide for the cut you want.

What if I am between two sizes?

Choose the smaller for a closer feel and the larger for more room. Try both if you can and notice how they feel after a few hours.

Can washing change the size?

High heat and rough washing can change shape and elastic. Follow the care label, use a laundry bag and let pairs dry fully.

You can find the full range at Copenhagen Bamboo.